Clip Like a Pro: Properly Oiled Clippers Are Key!
Are you tired of your clippers not working properly? Have you ever wondered what you’re doing wrong? The answer might be simpler than you think: you need to properly oil your clippers! Oiling your clippers is essential to their longevity and performance. In this step-by-step guide, we’ll show you how to properly oil your clippers like a pro!
Proper maintenance is the key to making your clippers last longer. Oiling your clippers keeps them functioning smoothly and helps prevent rust and wear and tear. By following these simple steps, you’ll be able to keep your clippers working like new for years to come.
Step 1: Gather Your Supplies and Ready Your Clippers
Before you get started, gather all the necessary supplies. You’ll need a cleaning brush, a soft cloth, and clipper oil. Make sure you choose the right oil for your clippers – the wrong kind can damage them.
Next, get your clippers ready. Make sure they’re clean and free of any debris or hair. Remove any attachments or blades and set them aside. It’s important to do this before oiling so that the oil can penetrate the blades properly.
Step 2: Disassemble and Clean Your Clippers
Now it’s time to take apart your clippers and clean them thoroughly. Use the cleaning brush to remove any hair or debris from the blades and body of the clippers. You can also use a soft cloth to wipe down the clippers.
If your clippers are particularly dirty, you can use a cleaning solution to give them a more thorough cleaning. Just make sure to follow the manufacturer’s instructions and rinse the clippers with water afterwards.
Step 3: Oil the Blades and Reassemble
Once your clippers are clean, it’s time to oil them. Apply a few drops of oil to the blades, making sure to cover the entire surface. Use a soft cloth to spread the oil around and make sure it’s evenly distributed.
After oiling the blades, reassemble the clippers. Make sure all the attachments and blades are in place and secure. Turn the clippers on for a few seconds to distribute the oil throughout the blades.
Step 4: Test Your Clippers and Make Adjustments
Now it’s time to test your clippers and make sure they’re working properly. Turn them on and run them over your hand to make sure they’re cutting smoothly. If the clippers are still not working properly, you may need to adjust the blade tension or alignment. Refer to your manufacturer’s instructions for guidance.
Step 5: Store Your Clippers for Optimal Performance!
Finally, it’s important to store your clippers properly to maintain their performance. Make sure to clean them after each use and oil them regularly. Store them in a dry and cool place, away from moisture and heat.
In conclusion, properly oiling your clippers is essential to their longevity and performance. By following these simple steps, you’ll be able to keep your clippers in top condition for years to come. Remember, a little maintenance goes a long way!
Step 1: Gather Your Supplies and Ready Your Clippers
Are your clippers feeling dull? Are they not cutting through hair as efficiently as they used to? It might be time to oil them up! Properly oiled clippers are essential for a smooth and even cut, making them a must-have tool for any hair stylist or barber.
Before you begin, it’s important to gather all the necessary supplies. You’ll need a few things, including clipper oil, a cleaning brush, a screwdriver, and a clean cloth.
Once you have your supplies, it’s time to get your clippers ready. Make sure they are unplugged and turned off before proceeding. Next, remove any excess hair or debris from the blades using a cleaning brush. This will ensure that the oil can penetrate the blades evenly.
Now it’s time to disassemble your clippers. Using a screwdriver, remove the blades from the housing. Be sure to keep track of any screws or small parts that may come loose during this process. Place them in a safe spot so that you don’t lose them.
Once you have disassembled your clippers, it’s time to start cleaning. Use your cleaning brush to remove any hair or debris from the blades and housing. Wipe down the blades and housing with a clean cloth, making sure to remove any leftover hair or debris.
Now that your clippers are clean, it’s time to move on to the next step: oiling the blades.
Properly oiling your clippers is essential for their longevity and optimal performance. Oil helps to reduce friction between the blades, allowing them to move more smoothly and efficiently. It also helps to prevent rust and corrosion, which can damage your blades over time.
To oil your clippers, simply apply a few drops of clipper oil to the blades and housing. Be sure to follow the manufacturer’s instructions regarding the amount and type of oil to be used. Using too much or the wrong type of oil can cause damage to your clippers.
Once you have oiled your clippers, it’s time to reassemble them. Carefully put the blades back into the housing, making sure that any screws or small parts are securely in place. Use your screwdriver to tighten any screws that need to be tightened.
Now that your clippers are reassembled, it’s time to test them out. Turn them on and run them through a few strands of hair to ensure that they are cutting smoothly and evenly. If you notice any issues, such as uneven cutting or pulling, you may need to make some adjustments.
To make adjustments, simply loosen the screws on the blade and move them slightly closer or farther apart until you achieve the desired result. Be sure to tighten the screws once you have made your adjustments.
Now that your clippers are oiled, cleaned, and reassembled, it’s time to store them for optimal performance. Be sure to store them in a clean and dry location, away from any moisture or humidity. This will help to prevent rust and corrosion, which can damage your blades over time.
Properly oiling your clippers is essential for their longevity and optimal performance. By following these simple steps, you can ensure that your clippers are always ready to clip like a pro!
Step 2: Disassemble and Clean Your Clippers
Congratulations on taking the first step towards proper clipper maintenance! You’ve gathered all your supplies, and you’re ready to get started. The second step in our guide is all about disassembling and cleaning your clippers.
Why is this step so important, you may ask? Well, over time, hair clippings can get stuck in the blades, leading to a dull or uneven cut. This can not only be frustrating for you but also uncomfortable for your furry friend. Additionally, clippers that aren’t cleaned regularly can harbor bacteria and germs, which can cause skin irritation or infection.
So, grab your clippers and let’s get started!
The first thing you’ll want to do is unplug your clippers to ensure your safety. Then, remove the blade guard to expose the blades. Depending on your clippers, you may need to use a screwdriver to remove the screws holding the blades in place.
Once the blades are removed, use a soft-bristled brush to remove any hair or debris from both the blades and the blade guard. Be sure to get into all the nooks and crannies to ensure a thorough cleaning.
Next, you’ll want to clean the blades with a clipper cleaning solution or rubbing alcohol. This will help to disinfect the blades and remove any buildup or residue. Simply apply the solution to a clean cloth and wipe down both the blades and the blade guard.
Once you’ve cleaned the blades, it’s essential to lubricate them properly. We’ll go into more detail on this in the next step, but for now, just make sure to avoid getting any cleaning solution or water into the motor of your clippers, as this can cause damage.
Finally, reassemble your clippers, making sure to reattach the blades and any screws or guards that you removed. Plug in your clippers and turn them on to ensure that everything is working correctly.
And there you have it – step two is complete! By disassembling and cleaning your clippers regularly, you’ll ensure a clean, efficient, and safe grooming experience for both you and your furry friend. Stay tuned for the next step, where we’ll talk all about proper blade lubrication.
Step 3: Oil the Blades and Reassemble
Congratulations! You’ve made it to step 3 of our guide on how to properly oil your clippers. By this point, you should have already gathered your supplies, readied your clippers, and disassembled and cleaned them thoroughly. Now, it’s time to oil the blades and reassemble your trusty tool.
Oiling your clippers is an essential step in keeping them in tip-top shape. Properly lubricated blades will not only extend the lifespan of your clippers, but they will also make for a smoother, more efficient cut. Plus, regular oiling can prevent rust and corrosion from developing on your blades, which is especially important if you store your clippers in a damp environment.
Here’s what you need to do to oil your clippers like a pro:
Step 1: Choose the Right Oil
When it comes to choosing the right oil for your clippers, you don’t want to skimp out. Using a high-quality clipper oil will not only ensure that your blades are properly lubricated, but it can also prevent build-up and keep your clippers running smoothly for longer.
There are a variety of clipper oils on the market, so it’s important to do your research and choose one that works best for your clippers. Some popular brands include Andis, Oster, and Wahl. You can usually find clipper oil at your local pet store or online retailer.
Step 2: Apply the Oil
Now that you have your oil, it’s time to apply it to your clippers. Start by placing a few drops of oil on the blades, making sure to get it in all the nooks and crannies. Then, turn on your clippers and let them run for a few seconds to distribute the oil evenly.
Be sure not to overdo it with the oil – too much can actually attract dirt and debris, which can clog up your blades. A little goes a long way, so stick to just a few drops.
Step 3: Wipe Away Any Excess Oil
After you’ve applied the oil, use a clean cloth or paper towel to wipe away any excess. This will help prevent the oil from getting on your hands or clothing, and it will also prevent any build-up from occurring on your blades.
Step 4: Reassemble Your Clippers
Once you’ve oiled your blades and wiped away any excess, it’s time to reassemble your clippers. Make sure that all the pieces are in the correct order and that they fit snugly together. Tighten any screws or bolts that may have come loose during cleaning.
Step 5: Test Your Clippers
Now that your clippers are fully assembled and properly oiled, it’s time to test them out. Turn them on and run them through some hair to make sure they’re cutting smoothly and efficiently. If you notice any issues, such as pulling or uneven cutting, you may need to make some adjustments.
Step 6: Store Your Clippers Properly
Last but not least, it’s important to store your clippers properly to ensure optimal performance. After each use, wipe them down with a clean cloth to remove any hair or debris, and store them in a dry, cool place. Avoid storing them in a damp environment or leaving them out in the open where they can collect dust and dirt.
By following these simple steps, you’ll be well on your way to properly oiling your clippers and extending their lifespan. Remember, a well-oiled clipper is a happy clipper – and a happy clipper means a happy stylist and client!
Step 4: Test Your Clippers and Make Adjustments
Congratulations! You’ve made it to step four of our guide to properly oiling your clippers. You’ve gathered your supplies, disassembled and cleaned your clippers, and oiled the blades. Now it’s time to put your clippers to the test and make any necessary adjustments.
Testing your clippers is an important step in the process because it ensures that they are working properly and cutting hair evenly. To test your clippers, follow these simple steps:
1. Turn on your clippers and hold them at a 45-degree angle to the hair.
2. Gently run the clippers through a small section of hair, making sure to keep the blades flat against the scalp.
3. Check the results. If the hair is cut evenly and smoothly, then your clippers are ready to go. If the hair is uneven or jagged, then you may need to make some adjustments.
Adjusting your clippers may seem intimidating, but it’s actually quite simple. Here are some common adjustments you may need to make:
1. Adjust the blades. If your clippers are not cutting evenly, you may need to adjust the blades. Most clippers have a lever that allows you to adjust the cutting length. Move the lever up or down to adjust the blades.
2. Check the tension. If your clippers are not cutting evenly, you may need to check the tension. Clippers have a tension screw that can be adjusted with a screwdriver. Turn the screw clockwise to increase tension or counterclockwise to decrease tension.
3. Clean the blades. If your clippers are not cutting evenly, you may need to clean the blades again. Follow step two to disassemble and clean the blades, then oil them again before testing.
Once you’ve made any necessary adjustments, test your clippers again. Repeat the process until your clippers are cutting hair evenly and smoothly.
Pro tip:
While testing your clippers, pay attention to any unusual noises or vibrations. If your clippers are making strange noises or vibrating excessively, they may need to be repaired or replaced. Contact the manufacturer or a professional barber supply store for assistance.
Now that your clippers are working properly, it’s important to store them correctly for optimal performance.
Pro tip:
When not in use, store your clippers in a dry, cool place. Avoid storing them in a damp bathroom or in direct sunlight, as this can cause the blades to rust or corrode. You may also want to invest in a protective case or blade guard to prevent damage during transport.
Congratulations, you’ve successfully learned how to properly oil your clippers! With a little bit of care and maintenance, your clippers will continue to provide you with clean and precise cuts for years to come. Happy clipping!
Step 5: Store Your Clippers for Optimal Performance!
Congratulations! You’ve made it through all the steps to properly oil your clippers. Now, it’s time to talk about how to store them for optimal performance.
Proper storage of your clippers is just as important as proper maintenance. If you don’t store your clippers correctly, all the hard work you just put into oiling them will go to waste. Here are some tips on how to store your clippers properly:
1. Keep them in a dry place
Moisture is the enemy of all clippers. It can cause rust and corrosion, which can damage the blades and motor. Make sure to store your clippers in a dry place, away from any moisture. A cabinet or a drawer is a good option.
2. Keep them in a cool place
Heat can also damage your clippers. It can cause the blades to warp and the motor to overheat. Make sure to store your clippers in a cool place, away from any heat sources. Avoid storing them in direct sunlight or near any heating vents.
3. Keep them in a protective case
A protective case can help prevent dust and dirt from getting into your clippers, and protect them from any accidental damage. Some clippers come with a case, but if yours didn’t, you can purchase one separately. Look for a case that’s made specifically for your clippers.
4. Keep them away from children and pets
Clippers can be dangerous if not used properly. Make sure to store them in a place where children and pets can’t reach them. This will not only keep them safe, but also prevent any accidental damage to your clippers.
5. Oil them before storing
Before storing your clippers, make sure to oil them one last time. This will help keep the blades lubricated during storage, and ensure that they’re ready to use the next time you need them.
By following these tips, you can ensure that your clippers are properly stored and ready to use when you need them. Proper maintenance and storage are key to getting the most out of your clippers, so make sure to take good care of them. Happy clipping!
Writer, Independent Journalist, Informational Blogger Digital Creator